Firmware¶
The driver's firmware is open source and released as numbered builds. A driver shipped with firmware 105 or newer carries a bootloader and updates itself over UART or CAN, and so do some drivers shipped before 105, which report 103 (Drivers that report 103 says how to tell). A driver without the bootloader needs it installed once with a programming adapter.
In this chapter¶
- Releases and versions: how releases are numbered, how to see which one a driver runs, what the release notes contain
- The bootloader: what it is, how the driver boots, how it is entered, its protocol and tools
- Updating through the bootloader: the normal update, with Motor GUI, the bootloader's command-line tool, or a PAR6 control box
- Installing the bootloader on an older board: for a driver that runs firmware 103 or older
- Building from source: PlatformIO, the memory layout, uploading with a programming adapter
The release notes of every release up to the one this site describes are in the appendix, Firmware release notes.
Comments
Found a mistake on this page? Edit it on GitHub · Report it · Get help · This page as Markdown · llms.txt · The whole manual as PDF